| EPSON Type Printing Plotter 260ml Big Ink Cartridge |
| |
| Cartridge name: JH801 |
| |
| Cartridge capacity: 260ml |
| |
| Ink type: Water-based ink |
| |
| Color: Monochrome, default black or blue |
| |
| Applicable printer model: KAEMI 260ml large ink cartridge Plotter |
| |
| Main performance parameters: |
| |
| - Viscosity: 2.5-3.5cp, ensuring good flow performance to suit the printer's inkjet system. |
| - Surface tension: 35mN-45mN/m, which helps to form stable droplets and guarantee print quality. |
| - pH value: Generally between 7-12, usually about 6.5, neutral to prevent corrosion of the printer nozzle. |
| - Conductivity: reflects the level of salt content, salt content is usually not more than 0.5%, to avoid the formation of crystallization in the nozzle. |
| - Dispersant: contains surfactants that can improve the physical properties of the ink surface, enhance the affinity and wettability of the ink and the ink cartridge sponge. |
| |
| Shelf life: Generally two years |
| |
| Storage conditions: |
| |
| - Sealed storage to prevent ink volatilization or contamination. |
| - Avoid direct sunlight to avoid affecting ink performance. |
| - Suitable for storage at room temperature, too high or too low temperature may have adverse effects on the ink. |
| |
| Printing effect features: |
| |
| - Bright colors, high saturation, capable of presenting clear, realistic images and text. |
| - With good light resistance and water resistance, printed works can be maintained for a long time under certain conditions without fading. |
| |
| Note: |
| |
| - Do not tear the outer packaging and stoma seal of the cartridge before it is installed on the machine. |
| - After the cartridge is unsealed, install it on the printer as soon as possible, otherwise it may cause ink leakage or no color spray. |
| - When installing the ink cartridge, remove the stomatal seal according to the instructions in the printer manual, but do not remove other seals at will to avoid ink leakage. |
| - Usually clean the print head 3 times each time you install a new cartridge (please clean the print head at least once). |
| - When any cartridge is out of ink or not installed, the printer may not work properly even if there is ink in the other cartridges. |
| - Once the new cartridge is installed, do not remove it before replacing it. Do not open the cartridge protection clip unless you want to replace the cartridge, otherwise the cartridge may not be used again. |
| - Do not reach into the printer or touch the cartridge while the printer is working. |
| - When you have doubts about the quality of the ink cartridge and remove the unused ink cartridge from the printer, please seal the bottom ink jet with transparent tape, seal it with a plastic bag, and give it to the dealer at the place of purchase for the manufacturer to test and determine the quality of the ink cartridge. |
| - Do not use ink cartridges past their expiration date. |
